This changeset attempts to fix a few problems when giving using
the high 32bits of a 64bit section offset. There are likely more
issues (or perhaps regressions) lurking in the muck here. In general,
this moves a few data type declarations to use uplong. Also, add
support for 64bit mingw32 building under cygwin. Because native
types are used for 64 bit offsets, this won't fix challenges with
cross compiling from 32bit -> 64bit.
Tested under cygwin, against binary compiled with
-Wl,-Ttext=0xffffff8000000000
Signed-off-by: Andrew Mulbrook <andrew262@gmail.com>
to the appropriate CFLAGS. In addition, memory hooks are very different
on OSX, so build of bcheck.c had to be disabled for now.
Change of the CFLAGS does affect builds on other platforms, and this needs
to be tested.
Applied patch found on stackoverflow (link below). I also found some
related changes that looked like logically needed. The stackoverflow
changes addressed only two registers which were breaking a compile.
However reading the code in the same file shows two other register
accesses that, while not breaking the build, should have the same fix.
http://stackoverflow.com/questions/3712902/problems-compiling-tcc-on-os-x/3713144#3713144
The test driver was changed by changing 'cp -u' into 'cp' as '-u' is not
supported on mac osx.
I found that osx build required the WITHOUT_LIBTCC define. I suspect the
reason for this is tcc unability to handle mach-o files. In order to
properly address this I had to change 'configure' to propagate target os
name to Makefile.
Current state is that simple tests work, but not the whole 'make test'
suite runs.
To the best of my knowledge, these changes should not impact other
platforms.
- use {B} to substitute tcc_lih_path (instead of \b)
- expand CONFIG_TCC_CRTPREFIX in CONFIG_TCC_LIBPATHS
which fixes duplicate CONFIG_SYSROOT.
- put default CONFIG_SYSROOT ("") into tcc.h
- remove hack from commit db6fcce78f
because $(tccdir)/include is already in sysincludes
- configure: error out for unrecognized options.
- win32/build-tcc.bat: put libtcc into base dir where it will
find lib/include automatically, and build libtcc_test example.
--sysincludepaths=.. specify system include paths, colon separated"
Sets CONFIG_TCC_SYSINCLUDEPATHS
--libpaths=... specify system library paths, colon separated"
Sets CONFIG_TCC_LIBPATHS
--crtprefix=... specify location of crt?.o"
Sets CONFIG_TCC_CRTPREFIX
--elfinterp=... specify elf interpreter"
Sets CONFIG_TCC_ELFINTERP
Also the CONFIG_TCC_XXX were renamed to make them look
more consistent.
Also move the elf_interp definitions to tcc.h.
This allows passing colon separated paths to
tcc_add_library_path
tcc_add_sysinclude_path
tcc_add_include_path
Also there are new configure variables
CONFIG_TCC_LIBPATH
CONFIG_TCC_SYSINCLUDE_PATHS
which define the lib/sysinclude paths all in one and can
be overridden from configure/make
For TCC_TARGET_PE semicolons (;) are used as separators
Also, \b in the path string is replaced by s->tcc_lib_path
(CONFIG_TCCDIR rsp. -B option)
This was already possible using
make NOTALLINONE=1
and is now the default.
To build as previously from one big source, use
make ONE_SOURCE=1
Cross compilers are still build from one source because using
separate objects requires separate build directories one per
platform which currently is not (yet) supported by the makefile.
We could probably use gnu-makeish target variables like
$(I386_CROSS): OUTDIR=build/i386
$(X64_CROSS): OUTDIR=build/x86-64
and so on ...
Also NEED_FLOAT_TYPES for arm-gen is removed. It was about
variables that are referenced from outside (libtcc, tccgen).
We could declare them in tcc.h (as with reg_classes) or have
them twice in arm-gen.c. I chose option 2.
Use @BINDIR@ in shebang of examples to put the right path on the target
system. That is, use #!/usr/local/bin/tcc if tcc is installed in /usr/local/bin
and #!/usr/bin/tcc if tcc is installed in /usr/bin/tcc.
* Set CFLAGS entirely in configure if not already set.
* Compile bcheck.c with the same flags as the other source files
* Don't strip binaries by default (GB are cheap now) but provide a
--strip-binaries option in configure script.
ARM architecture doesn't have any libtcc1 implementation but tcc load
libtcc1.a in all case. This patch add a conditional preprocessor
instruction to load libtcc1.a only when there is an implementation for
the target architecture.
Summary of what was changed or added so far:
These won't work on Win32
* --disable-static option builds libtcca.so.1.0 and associated simlinks.
This replaces libtcca.a, which is a static library with a dynamic one.
* --with-selinux option uses mmap to enable tcc -run to work with Selinux.
* attempt to build tcc1.def on i386 / x86_64 when --enable-cross is used.
If successful, this gets around the "_start not found" or "_winstart not
found" messages when i386-win32-tcc is run on these systems. I say "if"
because it gave me fits of trouble on my system and not all others have
been tested yet. tcc1.def is not a real .def file by the way, but it works,
so it's kind of a dancing bear at this point. We're not concerned that
it's getting the steps wrong. We're just happy it's not eating us for lunch.
* additional make target for lib/tcc1.def on non-win32 builds
tcc1.def was formerly lib/libtcc1.a but has bee made into its
own Makefile target, tcc1.def
* use mv instead of cp on config.h
this fixes a mistake I made which caused Makefile to rebuild
all targets every time
* make links from libtcc.so.1.0 to libtcc.so.1 and libtcc.so
merge more changes from Fedora spec file into Makefile
I did a lot of reading on Makefiles. It should be a lot less hacked now that I got rid of my temporary cross-build script. I had to build i386-win32-tcc as 32 bit in order to use it to build the windows version of libtcc1.a and move that into lib directory. Still testing, but it does build windows fib.exe smoothly now and generates shard lib, libtcc.so.1.0 and test links against it.
